During a scuba ascent, pressure drops and dissolved nitrogen begins to leave the body. A slow, controlled rise and any required stops give it time to escape safely, lowering the risk of harmful bubbles. These habits matter most after deeper or longer dives—and help make every return to the surface safer.

Multiple Choice

When ascending, what safety practice is crucial to avoid decompression sickness?

Staying at designated stops during ascent is a critical safety practice to avoid decompression sickness, also known as 'the bends.' During a dive, divers absorb nitrogen from the air they breathe, which can dissolve in their bloodstream and tissues under pressure. As divers ascend, the pressure decreases, and nitrogen that has been absorbed starts to come out of solution. If a diver ascends too quickly, this nitrogen can form bubbles in the bloodstream, leading to serious health issues. By incorporating safety stops, typically at depths of around 3 to 5 meters (10 to 15 feet), divers allow more time for the nitrogen to safely leave their system more gradually. These stops give the body a chance to off-gas the nitrogen more effectively, thus greatly reducing the risk of bubbles forming in the tissues or bloodstream. This practice enhances safety significantly, particularly on deeper or longer dives, where nitrogen absorption is more pronounced.

Why a Slow, Controlled Ascent Matters in Open Water Diving

A dive doesn’t end when a diver turns toward the surface. The ascent is part of the dive, and it calls for just as much care as the descent. Moving upward too quickly can raise the risk of decompression sickness, a potentially serious condition linked to changes in pressure. A slow, controlled ascent—and a safety stop when appropriate—gives the body time to respond as pressure drops.

For new divers, this can seem counterintuitive. The surface is close, the air supply may be on the mind, and going straight up feels like the quickest way out. But underwater, “quick” isn’t always safe. A calm return to the surface is one of the key habits that helps make recreational diving safer.

What pressure does to the body underwater

As a diver descends, the surrounding water pressure rises. The air breathed from a scuba cylinder contains nitrogen, and under greater pressure, more nitrogen dissolves into the blood and body tissues. The amount absorbed depends on factors such as depth and time underwater.

During ascent, pressure falls. Nitrogen then starts to leave the body and return to the lungs, where it can be breathed out. This process is called off-gassing. It takes time—rather like letting air out of a balloon slowly instead of pulling the stopper all at once.

If a diver ascends too fast, dissolved nitrogen may form bubbles in the body. These bubbles can interfere with blood flow or affect tissues and nerves, causing decompression sickness, often called “the bends.” Symptoms can range from joint pain and unusual fatigue to numbness, weakness, or trouble breathing. They may begin after the dive, so a diver who feels fine at the surface should still pay attention to how they feel later.

A safety stop: a small pause with a clear purpose

On many recreational dives, divers make a safety stop near the end of the dive. A common guideline is to pause for about three minutes at roughly 5 metres (15 feet), though the exact depth and duration can vary with training, conditions, and dive procedures. Some divers use a range of about 3 to 5 metres (10 to 15 feet).

The stop gives the body extra time to release nitrogen as the diver nears the surface. It also encourages a measured finish rather than a hurried ascent. That pause can be especially useful after a deeper or longer dive, when the body has taken up more nitrogen.

A safety stop is not a guarantee against decompression sickness. Nor does it replace a controlled ascent. Think of it as one layer in a set of safeguards: keep track of depth and time, follow the dive computer or dive plan, rise at a controlled rate, and make the stop when it’s appropriate and safe.

Safety stops and decompression stops aren’t the same

The terms can sound similar, but they describe different things. A safety stop is generally a recommended pause during a recreational dive that remains within its no-decompression limits. A decompression stop, by contrast, is a required part of a dive profile when a diver has gone beyond those limits. It allows the body to release gas in stages before reaching the surface.

That distinction matters. A safety stop should never be treated as a way to make an unsafe ascent acceptable, and a diver should not skip a required decompression stop. Divers should follow their training, dive computer, and the plan agreed on with their buddy. If a computer signals a required stop, the diver needs to respond according to their training and the device’s instructions.

Why rushing upward can cause trouble

A fast ascent makes the pressure around the diver drop rapidly. That gives nitrogen less time to leave the body in a controlled way. It can also create other hazards. As pressure decreases, air in the lungs expands; a diver who holds their breath while rising can suffer a serious lung injury. This is why scuba divers are taught to breathe continuously and never hold their breath during ascent.

Rapid movement toward the surface can also make it harder to maintain buoyancy and stay aware of a buddy, boat traffic, or changing conditions. The last few metres may look simple, but they’re not a free pass. In fact, pressure changes are proportionally greatest close to the surface, so steady control remains important all the way up.

A diver’s ascent should follow the speed taught in their course and indicated by their dive computer, if one is in use. Different devices and training systems may display ascent-rate guidance in different ways. Rather than relying on a single number remembered from a conversation, divers should know how their own equipment works and follow current instruction.

Conditions can change the plan

A safety stop is only useful if the diver can make it safely. Strong current, rough water, low air supply, equipment issues, or a diver who needs immediate help may change what’s possible. Safety comes first; divers should follow their training and make sensible decisions based on the situation.

That’s one reason dive planning matters before anyone enters the water. Buddies can agree on maximum depth, time, gas limits, ascent procedures, and what to do if they become separated. A dive computer helps track depth and time, but it doesn’t make decisions for the diver. It’s a tool, not a substitute for awareness or sound judgment.

Divers also need to account for factors that may affect decompression risk, including repetitive dives, cold, exertion, and individual health. No single rule fits every person or every dive. If a diver feels unwell, has concerns about a medical condition, or notices possible decompression symptoms, they should seek professional medical advice. Suspected decompression sickness needs prompt attention; emergency services and a diving medicine specialist can guide care.

A calmer finish makes for a safer dive

The key idea is simple: don’t race the surface. A controlled ascent lets nitrogen leave the body more gradually, while a safety stop—when appropriate—adds valuable time near the end of the dive. These steps reduce risk, though they can’t remove it entirely.

Good diving often looks quiet from the outside. A diver checks the computer, stays close to a buddy, keeps breathing, and rises at a measured pace. Then comes a short pause in the blue before the final metres. It may feel like a small detail, but those few minutes reflect a larger principle: safe diving depends on patience, planning, and respect for how the body responds to pressure.